1-800-522-7274 AVAILABLE 24/7

Hablamos Español

Wilshire Law Firm Blog

7 Ways to Improve Your Riding Skills

motorcycle skills

Better Skills Can Help You Avoid a Motorcycle Accident

Every new motorcycle owner wants to be able to ride a like a professional. The better rider you are, the less likely you’ll be in a crash. But motorcycling skills do not come easy. You need to learn and practice and then keep practicing until you master them. Any skill worth mastering always takes time and effort. If you are hit by a car while practicing your skills, get in touch with a motorcycle accident lawyer immediately.

Here are seven ways to improve your riding skills.

  1. Braking like an expert

Braking is one of the first things you need to master – because your safety depends on it. You will need a big, empty parking lot to practice. Start from a low speed. Maintain your speed at 15 mph and squeeze the brake lever gradually until you feel the front wheel locking up. At this point, the rear wheel may lift off the ground. Repeat it until you have mastered the technique at this speed. Then move up to 20 mph and then 25 mph and so on.

  1. Steering smoothly and effortlessly

The key to proficient motorcycle riding is to master the art of controlling your motorcycle’s steering. Go to that big, empty parking lot. Ride around in a big lazy circle and gradually make the circle smaller until you can’t make it any smaller. Once you have mastered that, imagine a winding path and practice traversing curves until you can do it easily.

  1. Turning the corners expertly

Learning to turn the corners expertly saves you time and also saves you from accidents. Find a straightway with a corner and practice turning it skillfully. Slow down as your approach the corner, downshift to a lower gear, and then carefully steer around the corner. Practice it until you can do it comfortably and effortlessly.

  1. The Clutch-less upshift
READ  How to Get a Motorcycle License

The clutch-less upshift leaves your left hand free for other things. Place your left foot under the shift lever and apply a small upward pressure while accelerating. Instead of pulling the clutch, hold that upward pressure and quickly close the throttle just a little. Move your foot back to its place on the pedal once the gear slips home.

  1. The Rev-matched downshift

The rev-matched downshift allows you to downshift quickly without breaking the rear tire’s traction. While squeezing the front brake lever, quickly pull in the clutch, open the throttle, select the lower gear, and then release the clutch. This downshifting technique is especially useful when braking for a corner. But it is not as easy as it sounds. You will need hours of practice to master it.

  1. Lane Splitting Skill

Mastering the lane splitting skill saves you time and makes you a better rider. Find a red light where cars tend to form two or more lanes and approach it just after it turns red. Make your way carefully to the front of the queue, calculate the remaining time, and if there is enough time, plant yourself squarely in front of one of lines of the cars. This skill needs a lot of practice to master.

  1. The Art of Sliding

Sliding is an advanced technique that makes it possible for a fast motorcycle rider to slow down and turn at the same time while both wheels are still spinning. It allows you to turn a corner quickly. Find a straightway with a sharp corner. Approach the corner at a high speed and reduce your speed by applying the rear brake. Turn the front tire around the corner at the maximum lean angle. Once you have turned the corner, open the throttle, and ride on. You will need a lot of practice to master this advanced skill.

READ  New Motorcycle Buyer’s Guide

Get Legal Help from Wilshire Law Firm

Learning to improve your motorcycle riding skills takes a lot of time, effort, and patience. If you are injured in a collision with a car while practicing, contact a motorcycle accident lawyer immediately to learn how to file a claim.

Free Case Consultation

  • This field is for validation purposes and should be left unchanged.