Ways to Prolong the Life of Your Motorcycle

Maintenance Tips by a Knowledgeable Motorcycle Accident Attorney

The fact that you are reading this article means that you most likely are a regular motorcyclist. Also, chances are that you want to maintain your motorcycle in excellent condition for as long as possible. To prolong the life of your bike, you simply need to take good care of it. Here are a few ways of how you can do that.

Break it in well

The first few thousand miles are the most important miles for your bike. Adhere to the break-in guidelines contained in the owner’s manual and have your motorcycle serviced after approximately 600 miles.

Lubricate

Depending on the bike’s model, various parts (suspension linkages wheel bearings and steering head bearings), chains, and controls might need some lubrication. To keep out water, avoid pressure washers when it comes to cleaning these parts. Additionally, remember to check your fork oil and have it changed every few years.

Final drive

You will need to keep an eye on sprocket and chain wear, the rear-drive housing, or belt tension and cracking depending on the kind of final drive you have, The chains should be kept clean, lubed, and well adjusted. If the chain is worn out, it should be quickly replaced.

Brakes

Washing the brakes or parking your bike in rain results in external corrosion of the brake parts which eventually leads to dragging, wear, and also overheating. Brake fluid usually absorbs moisture and this has the effect of reducing its boiling point. This causes internal corrosion of the calipers, wheel, and master cylinders, as well as antilock braking system (ABS) parts.

Additionally, flushing of brake fluid is important for hydraulic brake parts. This should be done every 24 months.

Tires

Tires are vital to safety; they’re the legs of your bike. You ought to check each tire’s pressure before hitting the road, and make sure that they are at the recommended pressure stated in the manual. If not, inflate (or deflate) them to the recommended pressure. You should always carry your own quality air-pressure gauge with you since the ones at gas station pumps are mostly inaccurate or broken.

Also, have the tires replaced when worn out. Tires wear with time and although the treads might appear to be fine, sunlight and aging can cause cracks in the sidewalls. Also, the treads flatten after thousands of miles have been covered. Replacing the tires can go a long way in keeping you safe on the road when riding. Nonetheless, if you have ever been injured from a motorcycle accident that was not your fault, contact an experienced motorcycle accident attorney to help you get the compensation you are entitled to.

Valve adjustments

Nearly all motorcycles need valve adjustments. Not performing valve adjustments could result in burned valves, engine failure, or reduced performance.

Batteries

Motorcycle batteries are not really easy to access, and it is for this reason that they tend to get overlooked until when there is real trouble. Batteries might be damaged if they are allowed to discharge when stored. To prevent this, utilize a maintenance charger to have it ready to ride. Also, do not leave the batteries in service once they get weak. The continuous charging required places a lot of stress on the charging system, which could eventually lead to premature failures of regulators and starters.

Clean the air filter

If you frequently ride in dusty regions, you need to clean the filter often or even have it replaced. In case your filter is missing, loose, dirty, or not well oiled, just know that you are allowing grit or dirt to grind away your engine.

In conclusion, take care of your motorcycle and it will take good care of you. Remember, if you or someone you love has been involved in a motorcycle accident, getting a motorcycle accident attorney will increase your chances of getting the highest compensation possible.

Last Updated: 03-24-2017